1p2t solid state rf switch specification sheet jfw model 50S-1352 jfw industries, inc. phone: 317-887-1340 sales@jfwindustries.com www.jfwindustries.com frequency range 800-2500 mhz configuration 1p2t impedance 50 ohms nominal vswr 1.3:1 maximum 800-1000mhz 1.4:1 maximum 1000-2500mhz insertion loss 0.4 db typical 800-1000mhz 0.5 db maximum 800-1000mhz 0.6 db typical 1000-2000mhz 0.7 db maximum 1000-2000mhz 0.7 db typical 2000-2500mhz 0.9 db maximum 2000-2500mhz isolation 50 db typical 800-1000mhz 45 db minimum 800-1000mhz 40 db typical 1000-2500mhz 36 db minimum 1000-2500mhz switching speed 10 microseconds (50% ttl to 10% or 9 0% rf) 10 microseconds (50% ttl to i.l.) 30 microseconds (50% ttl to full isolation) rf input power 50 watts average (hot switchable) 200 watts peak (1usec pulse) control logic (1 line) ttl low for common to j1 ttl high for common to j2 dc supply +15vdc @ 325 ma +5vdc @ 40 ma dc connector solder terminals rf connector sma, tnc or n female operating temperature range -20o to +70o c physical size see outline drawing 092-3022 12/23/2003 bac 12/23/2003 ecr/ecn # date rev appr / date ecr/ecn # dat e rev appr / date jfw form e-7-f rev f page 1 of 1
|